That's my Repository... Packages for all Tastes!

Treviño’s Ubuntu edgy suspend2 repository Informations

Ubuntu kernels patched with suspend2
This repository contains all the ubuntu kernel related packages containing both the ubuntu patches and the suspend2 support to improve your hibernation (to ram/disk) experience!
This repo is actually under development, so don't share it

You can use apt to download and install the packages. Use the following lines in /etc/apt/sources.list and use the command sudo apt-get update to enable downloading from this component.

Don't forget to read the notice on the frontpage!

deb http://download.tuxfamily.org/3v1deb edgy suspend2
deb-src http://download.tuxfamily.org/3v1deb edgy suspend2

Treviño’s Ubuntu edgy suspend2 repository Packages

acpi-support
Version:0.90+suspend2-3v1ubuntu0
acpi-support
Description:a collection of useful events for acpi More...

The scripts included in acpi-support include events for lid closure
and loss and gain of ac power. These are the only events that can be
supported with any level of safety cross platform.
Package:acpi-support_0.90+suspend2-3v1ubuntu0_i386.deb
hibernate
Version:1.94-3v1ubuntu0
hibernate
Description:smartly puts your computer to sleep (suspend to RAM or disk) More...

The hibernate script helps you in putting your computer to sleep, using one
of the various methods available in the kernel.

Hibernate can take care of loading and unloading modules, provides various
hacks needed to get some video cards to resume properly under X, can
optionally restart networking and system services, and basically do whatever
else you ask it. It can be extended by writing new "scriptlets" which run at
different points during the suspend process.

Currently the script supports all suspend mechanisms available through the
/sys/power/state interface (including ACPI suspend and the in-kernel software
suspend), as well as Software Suspend 2 (http://www.suspend2.net)
Package:hibernate_1.94-3v1ubuntu0_all.deb
initramfs-tools-suspend2
Version:0.4-3v1ubuntu1
initramfs-tools-suspend2
Description:helper scripts for mkinitramfs and suspend2 More...

This package adds helper scripts for better integration of suspend2 with
mkinitramfs.
Package:initramfs-tools-suspend2_0.4-3v1ubuntu1_i386.deb
linux-source-2.6.17
Version:2.6.17.1-11.37+suspend2.2.2.9
linux-doc-2.6.17
Description:Linux kernel specific documentation for version 2.6.17 More...

This package provides the various readme's in the 2.6.17 kernel
Documentation/ subdirectory: these typically contain kernel-specific
installation notes for some drivers for example. See
/usr/share/doc/linux-doc-2.6.17/Documentation/00-INDEX for a list of what
is contained in each file. Please read the Changes file, as it contains
information about the problems, which may result by upgrading your
kernel.
Package:linux-doc-2.6.17_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_all.deb
linux-headers-2.6.17-11
Description:Header files related to Linux kernel version 2.6.17 More...

This package provides kernel header files for version 2.6.17, for sites
that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-2.6.17-11/debian.README.gz for details
Package:linux-headers-2.6.17-11_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_i386.deb
linux-headers-2.6.17-11-386
Description:Linux kernel headers for version 2.6.17 on i386 More...

This package provides kernel header files for version 2.6.17 on
i386.

This is for sites that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-2.6.17-11/debian.README.gz for details.
Package:linux-headers-2.6.17-11-386_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_i386.deb
linux-headers-2.6.17-11-generic
Description:Linux kernel headers for version 2.6.17 on x86/x86_64 More...

This package provides kernel header files for version 2.6.17 on
x86/x86_64.

This is for sites that want the latest kernel headers. Please read
/usr/share/doc/linux-headers-2.6.17-11/debian.README.gz for details.
Package:linux-headers-2.6.17-11-generic_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_i386.deb
linux-image-2.6.17-11-386
Description:Linux kernel image for version 2.6.17 on i386 More...

This package contains the Linux kernel image for version 2.6.17 on
i386.

Also includes the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.

Supports Alternate x86 (486 and better) processors.

Geared toward desktop systems.

You likely do not want to install this package directly. Instead, install
the linux-386 meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package:linux-image-2.6.17-11-386_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_i386.deb
linux-image-2.6.17-11-generic
Description:Linux kernel image for version 2.6.17 on x86/x86_64 More...

This package contains the Linux kernel image for version 2.6.17 on
x86/x86_64.

Also includes the corresponding System.map file, the modules built by the
packager, and scripts that try to ensure that the system is not left in an
unbootable state after an update.

Supports Generic processors.

Geared toward desktop systems.

You likely do not want to install this package directly. Instead, install
the linux-generic meta-package, which will ensure that upgrades work
correctly, and that supporting packages are also installed.
Package:linux-image-2.6.17-11-generic_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_i386.deb
linux-image-debug-2.6.17-11-386
Description:Linux kernel debug image for version 2.6.17 on i386 More...

This package provides a kernel debug image for version 2.6.17 on
i386.

This is for sites that wish to debug the kernel.

The kernel image contained in this package is NOT meant to boot from. It
is uncompressed, and unstripped.
Package:linux-image-debug-2.6.17-11-386_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_i386.deb
linux-image-debug-2.6.17-11-generic
Description:Linux kernel debug image for version 2.6.17 on x86/x86_64 More...

This package provides a kernel debug image for version 2.6.17 on
x86/x86_64.

This is for sites that wish to debug the kernel.

The kernel image contained in this package is NOT meant to boot from. It
is uncompressed, and unstripped.
Package:linux-image-debug-2.6.17-11-generic_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_i386.deb
linux-kernel-devel
Description:Linux kernel hacking dependencies More...

This is a dummy package that will install all possible packages
required to hack comfortably on the kernel.
Package:linux-kernel-devel_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_all.deb
linux-libc-dev
Description:Linux Kernel Headers for development More...

This package provides headers from the Linux kernel. These headers
are used by the installed headers for GNU glibc and other system
libraries.
Package:linux-libc-dev_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_i386.deb
linux-source-2.6.17
Description:Linux kernel source for version 2.6.17 with Ubuntu patches More...

This package provides the source code for the Linux kernel version 2.6.17.

You may configure the kernel to your setup by typing "make config" and
following instructions, but you could get ncursesX.X-dev and try "make
menuconfig" for a jazzier, and easier to use interface. There are options
to use QT or GNOME based configuration interfaces, but they need
additional packages to be installed. Also, please read the detailed
documentation in the file
/usr/share/doc/linux-source-2.6.17/README.headers.gz.

If you wish to use this package to create a custom Linux kernel, then it
is suggested that you investigate the package kernel-package, which has
been designed to ease the task of creating kernel image packages.

If you are simply trying to build third-party modules for your kernel,
you do not want this package. Install the appropriate linux-headers
package instead.
Package:linux-source-2.6.17_2.6.17.1-11.37+suspend2.2.2.9+3v1ubuntu0_all.deb
suspend2
Version:2.2.9+3v1ubuntu1 (changes)
suspend2 (2.2.9+3v1ubuntu1) edgy; urgency=low
  • Updated kernel to linux-image-2.6.17-11
Source (dsc):suspend2_2.2.9+3v1ubuntu1.dsc
Source (tar.gz):suspend2_2.2.9+3v1ubuntu1.tar.gz
suspend2
Description:metapackage to ease the installation of suspend2 More...

This is a metapackage that installs the packages required to use
Software Suspend 2 (http://www.suspend2.net/) in Ubuntu. It will
install for you:
- a suspend-enabled kernel image
- initramfs hooks to automate resuming
- the hibernate script
- the patched acpi-support package to support hibernate
- the usplash user interface
Package:suspend2_2.2.9+3v1ubuntu1_all.deb
suspend2-userui
Version:0.6.4-5-3v1ubuntu0
suspend2-userui
Description:Description: graphical progress bar for Software Suspend 2 More...

The suspend2-userui packages are a simple user interface for
Software Suspend 2 while your machine is suspending (hibernating).
It can display either a graphical or a text-mode progress bar
indicating how for through the suspend process your machine is. It
will also display a corresponding progress bar for the resume process
when your computer wakes up.

This package is a metapackage to install suspend2-userui-text,
suspend2-userui-usplash and suspend2-userui-fbsplasha uis.
Package:suspend2-userui_0.6.4-5-3v1ubuntu0_i386.deb
suspend2-userui-fbsplash
Description:graphical progress bar for Software Suspend 2 More...

The suspend2-userui packages are a simple user interface for
Software Suspend 2 while your machine is suspending (hibernating).
It can display either a graphical or a text-mode progress bar
indicating how for through the suspend process your machine is. It
will also display a corresponding progress bar for the resume process
when your computer wakes up.

This package provides a graphical progress bar using the kernel's
framebuffer support. It uses fbsplash themes for the artwork to
display.

You will need to be running a kernel patched recent version of
suspend2 (at least 2.1.7) for this package to be useful.
Package:suspend2-userui-fbsplash_0.6.4-5-3v1ubuntu0_i386.deb
suspend2-userui-text
Description:text-mode progress bar for Software Suspend 2 More...

The suspend2-userui packages are a simple user interface for Software
Suspend 2 while your machine is suspending (hibernating). It can
display either a graphical or a text-mode progress bar indicating how
for through the suspend process your machine is. It will also
display a corresponding progress bar for the resume process when your
computer wakes up.

This package provides the text-mode progress bar.

You will need to be running a kernel patched recent version of
suspend2 (at least 2.1.7) for this package to be useful.
Package:suspend2-userui-text_0.6.4-5-3v1ubuntu0_i386.deb
suspend2-userui-usplash
Description:Ubuntu progress bar for Software Suspend 2 More...

The suspend2-userui packages are a simple user interface for
Software Suspend 2 while your machine is suspending (hibernating).
It can display either a graphical or a text-mode progress bar
indicating how for through the suspend process your machine is. It
will also display a corresponding progress bar for the resume process
when your computer wakes up.

This package provides a graphical progress bar using the kernel's
framebuffer support. It uses fbsplash themes for the artwork to
display.

You will need to be running a kernel patched recent version of
suspend2 (at least 2.1.7) for this package to be useful.
Package:suspend2-userui-usplash_0.6.4-5-3v1ubuntu0_i386.deb